dmesg - Phoronix Benchmark 09092012
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Fri Jun 22 12:19:21 UTC 2012
Command line: ro root=/dev/mapper/vg_ralphworkstation-lv_root rd_LVM_LV=vg_ralphworkstation/lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_ralphworkstation/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=de rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7f70000 (usable)
BIOS-e820: 00000000d7f7e000 - 00000000d7f80000 type 9
BIOS-e820: 00000000d7f80000 - 00000000d7f8e000 (ACPI data)
BIOS-e820: 00000000d7f8e000 - 00000000d7fe0000 (ACPI NVS)
BIOS-e820: 00000000d7fe0000 - 00000000d8000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000828000000 (usable)
DMI present.
SMBIOS version 2.5 @ 0xFC290
DMI: Supermicro H8DI3+/H8DI3+, BIOS 1.0b 12/07/2009
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x828000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000D0000000 mask FFFFF8000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000828000000 aka 33408M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xd7f70 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000d7f70000
0000000000 - 00c0000000 page 1G
00c0000000 - 00d7e00000 page 2M
00d7e00000 - 00d7f70000 page 4k
kernel direct mapping tables up to d7f70000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000828000000
0100000000 - 0800000000 page 1G
0800000000 - 0828000000 page 2M
kernel direct mapping tables up to 828000000 @ 12000-14000
RAMDISK: 3707d000 - 37fef615
ACPI: RSDP 00000000000fb490 00024 (v02 ACPIAM)
ACPI: XSDT 00000000d7f80100 0008C (v01 SMCI 20091207 MSFT 00000097)
ACPI: FACP 00000000d7f80290 000F4 (v03 120709 FACP1902 20091207 MSFT 00000097)
ACPI: DSDT 00000000d7f80660 05564 (v01 1A511 1A511000 00000000 INTL 20051117)
ACPI: FACS 00000000d7f8e000 00040
ACPI: APIC 00000000d7f80390 000B2 (v01 120709 APIC1902 20091207 MSFT 00000097)
ACPI: MCFG 00000000d7f80450 0003C (v01 120709 OEMMCFG 20091207 MSFT 00000097)
ACPI: SPMI 00000000d7f80490 00041 (v05 120709 OEMSPMI 20091207 MSFT 00000097)
ACPI: SLIC 00000000d7f804e0 00176 (v01 SMCI 20091207 MSFT 00000097)
ACPI: OEMB 00000000d7f8e040 00073 (v01 120709 OEMB1902 20091207 MSFT 00000097)
ACPI: SRAT 00000000d7f8a660 00190 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000d7f8a7f0 00038 (v01 120709 OEMHPET 20091207 MSFT 00000097)
ACPI: EINJ 00000000d7f8a830 00130 (v01 AMIER AMI_EINJ 20091207 MSFT 00000097)
ACPI: BERT 00000000d7f8a9c0 00030 (v01 AMIER AMI_BERT 20091207 MSFT 00000097)
ACPI: ERST 00000000d7f8a9f0 001B0 (v01 AMIER AMI_ERST 20091207 MSFT 00000097)
ACPI: HEST 00000000d7f8aba0 000A8 (v01 AMIER ABC_HEST 20091207 MSFT 00000097)
ACPI: SSDT 00000000d7f8ac50 01E48 (v01 S M C POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 0 -> APIC 12 -> Node 0
SRAT: PXM 0 -> APIC 13 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-d8000000
SRAT: Node 0 PXM 0 100000000-428000000
SRAT: Node 1 PXM 1 428000000-828000000
NUMA: Allocated memnodemap from 13000 - 23540
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000428000000
NODE_DATA [0000000000023540 - 000000000005753f]
bootmap [0000000000100000 - 0000000000184fff] pages 85
(9 early reservations) ==> bootmem [0000000000 - 0428000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002012024] TEXT DATA BSS ==> [0001000000 - 0002012024]
#3 [003707d000 - 0037fef615] RAMDISK ==> [003707d000 - 0037fef615]
#4 [000009a800 - 0000100000] BIOS reserved ==> [000009a800 - 0000100000]
#5 [0002013000 - 0002013214] BRK ==> [0002013000 - 0002013214]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
#8 [0000013000 - 0000023540] MEMNODEMAP ==> [0000013000 - 0000023540]
Bootmem setup node 1 0000000428000000-0000000828000000
NODE_DATA [0000000428000040 - 000000042803403f]
bootmap [0000000428035000 - 00000004280b4fff] pages 80
(9 early reservations) ==> bootmem [0428000000 - 0828000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002012024] TEXT DATA BSS
#3 [003707d000 - 0037fef615] RAMDISK
#4 [000009a800 - 0000100000] BIOS reserved
#5 [0002013000 - 0002013214] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000013000] PGTABLE
#8 [0000013000 - 0000023540] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] ff780
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 33408MB)
[ffffea000e8c0000-ffffea000e9fffff] potential offnode page_structs
[ffffea0000000000-ffffea000e9fffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0
[ffffea000ea00000-ffffea001c9fffff] PMD -> [ffff880428200000-ffff8804361fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00828000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x000d7f70
0: 0x00100000 -> 0x00428000
1: 0x00428000 -> 0x00828000
On node 0 totalpages: 4194042
DMA zone: 56 pages used for memmap
DMA zone: 123 pages reserved
DMA zone: 3799 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 866216 pages, LIFO batch:31
Normal zone: 45248 pages used for memmap
Normal zone: 3264320 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x16] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 22, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000d7f70000 - 00000000d7f7e000
PM: Registered nosave memory: 00000000d7f7e000 - 00000000d7f80000
PM: Registered nosave memory: 00000000d7f80000 - 00000000d7f8e000
PM: Registered nosave memory: 00000000d7f8e000 - 00000000d7fe0000
PM: Registered nosave memory: 00000000d7fe0000 - 00000000d8000000
PM: Registered nosave memory: 00000000d8000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at f0000000 (gap: f0000000:ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94424 r8192 d24360 u262144
pcpu-alloc: s94424 r8192 d24360 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 -- -- [1] 06 07 08 09 10 11 -- --
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8271295
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_ralphworkstation-lv_root rd_LVM_LV=vg_ralphworkstation/lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_ralphworkstation/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=de rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 32861208k/34209792k available (5151k kernel code, 656408k absent, 692176k reserved, 7166k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:504
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2600.255 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.51 BogoMIPS (lpj=2600255)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21015 entries in 83 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Six-Core AMD Opteron(tm) Processor 2435 stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 Ok.
Booting Node 1, Processors #6 #7 #8 #9 #10 #11 Ok.
Brought up 12 CPUs
Total of 12 processors activated (62424.78 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at d7f8e000 (335872 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 2: io port [1000, ffffff]
TOM: 00000000d8000000 aka 3456M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 2: mmio [e0000000, efffffff] ==> none
node 0 link 2: mmio [f0000000, ffffffff]
node 0 link 2: mmio [a0000, bffff]
node 0 link 2: mmio [d8000000, dfffffff]
TOM2: 0000000828000000 aka 33408M
bus: [00,07] on node 0 link 2
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [f0000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [d8000000, dfffffff]
bus: 00 index 4 mmio: [828000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 17
ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fd27f0), AE_NOT_FOUND
ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fd27f0), AE_NOT_FOUND
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff88081e639678), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff88081e639790), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff88081e6399e8), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff88081e639b00), AE_NOT_EXIST
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd8000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 24: [mem 0xf7dff800-0xf7dffbff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10: [mem 0xf7dfe000-0xf7dfefff]
pci 0000:00:12.1: reg 10: [mem 0xf7dfd000-0xf7dfdfff]
pci 0000:00:12.2: reg 10: [mem 0xf7dff000-0xf7dff0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xf7dfc000-0xf7dfcfff]
pci 0000:00:13.1: reg 10: [mem 0xf7dfb000-0xf7dfbfff]
pci 0000:00:13.2: reg 10: [mem 0xf7dfa800-0xf7dfa8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.5: reg 10: [mem 0xf7df9000-0xf7df9fff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: supports D1
pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 01-03]
pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.1: PCI bridge to [bus 03-03]
pci 0000:01:00.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:01:00.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:01:00.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xf7ee0000-0xf7efffff]
pci 0000:04:00.0: reg 18: [io 0xd800-0xd81f]
pci 0000:04:00.0: reg 1c: [mem 0xf7edc000-0xf7edffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xf7fe0000-0xf7ffffff]
pci 0000:05:00.0: reg 18: [io 0xe800-0xe81f]
pci 0000:05:00.0: reg 1c: [mem 0xf7fdc000-0xf7fdffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [mem 0xf8000000-0xfbffffff]
pci 0000:06:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 1c: [mem 0xfd000000-0xfdffffff 64bit]
pci 0000:06:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0b.0: PCI bridge to [bus 06-06]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xfebfffff]
pci 0000:00:0b.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04.BR28._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: [irq 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x02f8-0x02ff]
pnp 00:08: [irq 3]
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x03f0-0x03f5]
pnp 00:09: [io 0x03f7]
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0a00-0x0a0f]
pnp 00:0a: [io 0x0a10-0x0a1f]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x03e8-0x03ef]
pnp 00:0b: [irq 5]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x164e-0x164f]
pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xfed00000-0xfed003ff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0e: [mem 0xfec00000-0xfec00fff]
pnp 00:0e: [mem 0xfee00000-0xfee00fff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [io 0x0010-0x001f]
pnp 00:0f: [io 0x0022-0x003f]
pnp 00:0f: [io 0x0062-0x0063]
pnp 00:0f: [io 0x0065-0x006f]
pnp 00:0f: [io 0x0072-0x007f]
pnp 00:0f: [io 0x0080]
pnp 00:0f: [io 0x0084-0x0086]
pnp 00:0f: [io 0x0088]
pnp 00:0f: [io 0x008c-0x008e]
pnp 00:0f: [io 0x0090-0x009f]
pnp 00:0f: [io 0x00a2-0x00bf]
pnp 00:0f: [io 0x00b1]
pnp 00:0f: [io 0x00e0-0x00ef]
pnp 00:0f: [io 0x04d0-0x04d1]
pnp 00:0f: [io 0x040b]
pnp 00:0f: [io 0x04d6]
pnp 00:0f: [io 0x0c00-0x0c01]
pnp 00:0f: [io 0x0c14]
pnp 00:0f: [io 0x0c50-0x0c51]
pnp 00:0f: [io 0x0c52]
pnp 00:0f: [io 0x0c6c]
pnp 00:0f: [io 0x0c6f]
pnp 00:0f: [io 0x0cd0-0x0cd1]
pnp 00:0f: [io 0x0cd2-0x0cd3]
pnp 00:0f: [io 0x0cd4-0x0cd5]
pnp 00:0f: [io 0x0cd6-0x0cd7]
pnp 00:0f: [io 0x0cd8-0x0cdf]
pnp 00:0f: [io 0x0800-0x089f]
pnp 00:0f: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0f: [io 0x0b00-0x0b0f]
pnp 00:0f: [io 0x0b20-0x0b3f]
pnp 00:0f: [io 0x0900-0x090f]
pnp 00:0f: [io 0x0910-0x091f]
pnp 00:0f: [io 0xfe00-0xfefe]
pnp 00:0f: [io 0x0060-0x005f disabled]
pnp 00:0f: [io 0x0064-0x0063 disabled]
pnp 00:0f: [io 0x0ca2-0x0ca3]
pnp 00:0f: [mem 0xffb80000-0xffbfffff]
pnp 00:0f: [mem 0xfec10000-0xfec1001f]
pnp 00:0f: [mem 0xffffffff-0x1000ffffe]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: [mem 0xe0000000-0xefffffff]
pnp 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:11: [mem 0x00000000-0x0009ffff]
pnp 00:11: [mem 0x000c0000-0x000cffff]
pnp 00:11: [mem 0x000e0000-0x000fffff]
pnp 00:11: [mem 0x00100000-0xd7ffffff]
pnp 00:11: [mem 0xfec00000-0xffffffff]
pnp 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff88081e639678), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff88081e639678), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff88081e639790), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff88081e639790), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff88081e6399e8), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff88081e6399e8), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff88081e639b00), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff88081e639b00), AE_NOT_EXIST
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
system 00:0a: [io 0x0a00-0x0a0f] has been reserved
system 00:0a: [io 0x0a10-0x0a1f] has been reserved
system 00:0c: [io 0x164e-0x164f] has been reserved
system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0f: [io 0x04d0-0x04d1] has been reserved
system 00:0f: [io 0x040b] has been reserved
system 00:0f: [io 0x04d6] has been reserved
system 00:0f: [io 0x0c00-0x0c01] has been reserved
system 00:0f: [io 0x0c14] has been reserved
system 00:0f: [io 0x0c50-0x0c51] has been reserved
system 00:0f: [io 0x0c52] has been reserved
system 00:0f: [io 0x0c6c] has been reserved
system 00:0f: [io 0x0c6f] has been reserved
system 00:0f: [io 0x0cd0-0x0cd1] has been reserved
system 00:0f: [io 0x0cd2-0x0cd3] has been reserved
system 00:0f: [io 0x0cd4-0x0cd5] has been reserved
system 00:0f: [io 0x0cd6-0x0cd7] has been reserved
system 00:0f: [io 0x0cd8-0x0cdf] has been reserved
system 00:0f: [io 0x0800-0x089f] has been reserved
system 00:0f: [io 0x0b00-0x0b0f] has been reserved
system 00:0f: [io 0x0b20-0x0b3f] has been reserved
system 00:0f: [io 0x0900-0x090f] has been reserved
system 00:0f: [io 0x0910-0x091f] has been reserved
system 00:0f: [io 0xfe00-0xfefe] has been reserved
system 00:0f: [io 0x0ca2-0x0ca3] has been reserved
system 00:0f: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0f: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0f: [mem 0xffffffff-0x1000ffffe] could not be reserved
system 00:10: [mem 0xe0000000-0xefffffff] has been reserved
system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:11: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:11: [mem 0x00100000-0xd7ffffff] could not be reserved
system 00:11: [mem 0xfec00000-0xffffffff] could not be reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: bridge window [io disabled]
pci 0000:01:00.0: bridge window [mem disabled]
pci 0000:01:00.0: bridge window [mem pref disabled]
pci 0000:01:00.1: PCI bridge to [bus 03-03]
pci 0000:01:00.1: PCI bridge to [bus 03-03]
pci 0000:01:00.1: bridge window [io disabled]
pci 0000:01:00.1: bridge window [mem disabled]
pci 0000:01:00.1: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 01-03]
pci 0000:00:04.0: PCI bridge to [bus 01-03]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 06-06]
pci 0000:00:0b.0: PCI bridge to [bus 06-06]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem 0xf8000000-0xfebfffff]
pci 0000:00:0b.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07-07]
pci 0000:00:14.4: PCI bridge to [bus 07-07]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:01:00.1: setting latency timer to 64
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:0b.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:06: resource 1 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:06: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.1: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.1: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:06:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15817k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1347178501.659:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 4CB4AFE45B2E4608
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff88081e639678), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff88081e639678), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff88081e639790), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff88081e639790), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff88081e6399e8), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff88081e6399e8), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff88081e639b00), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff88081e639b00), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff88081e639678), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff88081e639678), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff88081e639790), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff88081e639790), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff88081e6399e8), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff88081e6399e8), AE_NOT_EXIST
ACPI Error: No handler for Region [SACS] (ffff88041e7a4780) [PCI_Config] (20090903/evregion-319)
ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff88081e639b00), AE_NOT_EXIST
ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff88081e639b00), AE_NOT_EXIST
ERST: Failed to get Error Log Address Range.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7dff000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-279.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7dfa800
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-279.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7dfe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-279.el6.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7dfd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-279.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7dfc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-279.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7dfb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-279.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7df9000
Refined TSC clocksource calibration: 2600.000 MHz.
Switching to clocksource tsc
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-279.el6.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2012-09-09 08:15:03 UTC (1347178503)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 972k freed
Freeing unused kernel memory: 1732k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
dracut: dracut-004-283.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
VGA switcheroo: detected Optimus DSM method \ handle
nouveau 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
nouveau 0000:06:00.0: setting latency timer to 64
[drm] nouveau 0000:06:00.0: Detected an NV40 generation card (0x043000a4)
[drm] nouveau 0000:06:00.0: Attempting to load BIOS image from PRAMIN
usb 3-1: new low speed USB device number 2 using ohci_hcd
[drm] nouveau 0000:06:00.0: ... appears to be valid
[drm] nouveau 0000:06:00.0: BIT BIOS found
[drm] nouveau 0000:06:00.0: Bios version 05.43.02.27
[drm] nouveau 0000:06:00.0: TMDS table version 1.1
[drm] nouveau 0000:06:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:06:00.0: DCB version 3.0
[drm] nouveau 0000:06:00.0: DCB outp 00: 01000300 00000028
[drm] nouveau 0000:06:00.0: DCB outp 01: 04010312 00000000
[drm] nouveau 0000:06:00.0: DCB outp 02: 04010310 00000028
[drm] nouveau 0000:06:00.0: DCB outp 03: 02020321 0000c080
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 0 at offset 0xEDF2
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 1 at offset 0xF195
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 2 at offset 0xF5B1
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 3 at offset 0xF739
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 4 at offset 0xF7FD
[drm] nouveau 0000:06:00.0: mem timing table length unknown: 14
[drm] nouveau 0000:06:00.0: 2 available performance level(s)
[drm] nouveau 0000:06:00.0: 0: core 300MHz shader 300MHz memory 1120MHz voltage 1300mV fanspeed 100%
[drm] nouveau 0000:06:00.0: 1: core 500MHz shader 500MHz memory 1120MHz voltage 1400mV fanspeed 100%
[drm] nouveau 0000:06:00.0: c: core 529MHz shader 529MHz memory 558MHz voltage 1200mV
[TTM] Zone kernel: Available graphics memory: 16440496 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[TTM] Initializing DMA pool allocator.
[drm] nouveau 0000:06:00.0: Detected 128MiB VRAM
[drm] nouveau 0000:06:00.0: 512 MiB GART (aperture)
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] nouveau 0000:06:00.0: Saving VGA fonts
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:06:00.0: 0xD3E3: Parsing digital output script table
usb 3-1: New USB device found, idVendor=046d, idProduct=c01b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB-PS/2 Optical Mouse
usb 3-1: Manufacturer: Logitech
usb 3-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input4
generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on TV encoder (output 3)
[drm] nouveau 0000:06:00.0: allocated 1920x1200 fb: 0x49000, bo ffff88041b229800
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:06:00.0: 0xD3E3: Parsing digital output script table
[drm] nouveau 0000:06:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[drm] nouveau 0000:06:00.0: Output DVI-I-1 is running on CRTC 0 using output C
Console: switching to colour frame buffer device 240x75
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:06:00.0 on minor 0
dracut: Starting plymouth daemon
usb 6-3: new full speed USB device number 2 using ohci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 6-3: New USB device found, idVendor=046b, idProduct=ff10
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-3: Product: Virtual Keyboard and Mouse
usb 6-3: Manufacturer: American Megatrends Inc.
usb 6-3: SerialNumber: serial
usb 6-3: configuration #1 chosen from 1 choice
ahci 0000:00:11.0: version 3.0
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf7dff800 port 0xf7dff900 irq 22
ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22
ata3: SATA max UDMA/133 abar m1024@0xf7dff800 port 0xf7dffa00 irq 22
ata4: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input5
generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:13.1-3/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input6
generic-usb 0003:046B:FF10.0003: input,hidraw2: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:13.1-3/input1
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: ATAPI iHAS424 Y, ZL1V, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM ATAPI iHAS424 Y ZL1V PQ: 0 ANSI: 5
ata4.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg_ralphworkstation/lv_root vg_ralphworkstation/lv_swap
dracut: inactive '/dev/vg_ralphworkstation/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_ralphworkstation/lv_home' [45.55 GiB] inherit
dracut: inactive '/dev/vg_ralphworkstation/lv_swap' [15.74 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_ralphworkstation-lv_root
dracut: Loading SELinux policy
type=1404 audit(1347178505.898:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 250818 rules.
SELinux: 2048 avtab hash slots, 250818 rules.
SELinux: 9 users, 12 roles, 3761 types, 187 bools, 1 sens, 1024 cats
SELinux: 81 classes, 250818 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1347178506.279:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr 1:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Jun 22 2012
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 1024MB 5: 1024MB
EDAC amd64: MC: 6: 1024MB 7: 1024MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 1024MB 5: 1024MB
EDAC amd64: MC: 6: 1024MB 7: 1024MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC amd64: CS4: Registered DDR2 RAM
EDAC amd64: CS5: Registered DDR2 RAM
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 1024MB 5: 1024MB
EDAC amd64: MC: 6: 1024MB 7: 1024MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 1024MB 1: 1024MB
EDAC amd64: MC: 2: 1024MB 3: 1024MB
EDAC amd64: MC: 4: 1024MB 5: 1024MB
EDAC amd64: MC: 6: 1024MB 7: 1024MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR2 RAM
EDAC amd64: CS1: Registered DDR2 RAM
EDAC amd64: CS2: Registered DDR2 RAM
EDAC amd64: CS3: Registered DDR2 RAM
EDAC amd64: CS4: Registered DDR2 RAM
EDAC amd64: CS5: Registered DDR2 RAM
EDAC amd64: CS6: Registered DDR2 RAM
EDAC amd64: CS7: Registered DDR2 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: CPU0: patch_level=0x0
microcode: CPU0: updated (new patch_level=0x10000da)
microcode: CPU1: patch_level=0x0
microcode: CPU1: updated (new patch_level=0x10000da)
microcode: CPU2: patch_level=0x0
microcode: CPU2: updated (new patch_level=0x10000da)
microcode: CPU3: patch_level=0x0
microcode: CPU3: updated (new patch_level=0x10000da)
microcode: CPU4: patch_level=0x0
microcode: CPU4: updated (new patch_level=0x10000da)
microcode: CPU5: patch_level=0x0
microcode: CPU5: updated (new patch_level=0x10000da)
microcode: CPU6: patch_level=0x0
microcode: CPU6: updated (new patch_level=0x10000da)
microcode: CPU7: patch_level=0x0
microcode: CPU7: updated (new patch_level=0x10000da)
microcode: CPU8: patch_level=0x0
microcode: CPU8: updated (new patch_level=0x10000da)
microcode: CPU9: patch_level=0x0
microcode: CPU9: updated (new patch_level=0x10000da)
microcode: CPU10: patch_level=0x0
microcode: CPU10: updated (new patch_level=0x10000da)
microcode: CPU11: patch_level=0x0
microcode: CPU11: updated (new patch_level=0x10000da)
Microcode Update Driver: v2.00 , Peter Oruba
e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:04:00.0: Disabling ASPM L0s
e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:04:00.0: setting latency timer to 64
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
e1000e 0000:04:00.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
e1000e 0000:04:00.0: irq 25 for MSI/MSI-X
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
e1000e 0000:04:00.0: irq 26 for MSI/MSI-X
e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:14:d1:f4
e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:04:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
e1000e 0000:05:00.0: Disabling ASPM L0s
e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
e1000e 0000:05:00.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
e1000e 0000:05:00.0: irq 28 for MSI/MSI-X
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
e1000e 0000:05:00.0: irq 29 for MSI/MSI-X
e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:14:d1:f5
e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 16506872k swap on /dev/mapper/vg_ralphworkstation-lv_swap. Priority:-1 extents:1 across:16506872k SSD
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
powernow-k8: Found 2 Six-Core AMD Opteron(tm) Processor 2435 (12 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2600 MHz)
powernow-k8: 1 : pstate 1 (2100 MHz)
powernow-k8: 2 : pstate 2 (1700 MHz)
powernow-k8: 3 : pstate 3 (1400 MHz)
powernow-k8: 4 : pstate 4 (800 MHz)
powernow-k8: 0 : pstate 0 (2600 MHz)
powernow-k8: 1 : pstate 1 (2100 MHz)
powernow-k8: 2 : pstate 2 (1700 MHz)
powernow-k8: 3 : pstate 3 (1400 MHz)
powernow-k8: 4 : pstate 4 (800 MHz)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
Ebtables v2.0 registered
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
readahead-collector: sorting
readahead-collector: finished
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:04:00.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.13)
eth0: no IPv6 routers present
udev: starting version 147
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 9 users, 12 roles, 3761 types, 187 bools, 1 sens, 1024 cats
SELinux: 81 classes, 250819 rules
type=1403 audit(1347179269.000:39798): policy loaded auid=500 ses=1
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
[drm] nouveau 0000:06:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:06:00.0: Setting dpms mode 0 on tmds encoder (output 1)